We're Open Now!

Same-Day Service | Upfront Pricing

Garburator Repair Installation Calgary – Getting Your Garburator Running Smoothly Again

Riverbend Dr SE, Calgary, CA, T2C 3K9


Garburators, also known as garbage disposals, are a common fixture in many modern kitchens. These devices are designed to shred food waste into small pieces that can easily be flushed down the drain. Garburators not only help reduce kitchen waste but also prevent clogs in the plumbing system. However, like any other appliance, garburators may require repair or replacement over time. In this article, we will discuss the importance of garburator repair and installation, signs that indicate a garburator needs repair, steps to repair or install a garburator, the importance of professional garburator repair and installation, maintenance tips, and FAQs related to garburators.

Signs that a garburator needs repair:
1. Unusual noises or vibrations: If your garburator is making strange noises or vibrating excessively, it could be a sign that there is a problem with the motor or blades.
2. Slow drainage: If water is draining slowly from your sink, it could indicate a clog in the garburator or the plumbing system.
3. Foul odors: If you notice unpleasant smells coming from your garburator, it may be due to food waste buildup or bacterial growth.
4. Leaks or pooling water under the sink: Leaks or pooling water under the sink could be a sign of a damaged garburator or faulty connections.
5. Difficulty turning on or off: If your garburator is having trouble turning on or off, it may be due to electrical issues or a faulty switch.

Steps to repair a garburator:
1. Turn off the power: Before attempting any repairs, make sure to turn off the power to the garburator to prevent electrocution.
2. Identify the problem: Inspect the garburator to identify the source of the issue, whether it's a jam, leak, or other malfunction.
3. Clear any jams: Use a jam wrench or Allen wrench to clear any obstructions in the garburator.
4. Reset the garburator: Press the reset button on the garburator to reset the motor.
5. Test the garburator: Turn the power back on and test the garburator to ensure it is functioning properly.

Importance of professional garburator repair and installation:
1. Safety considerations: Professional technicians have the knowledge and expertise to safely repair or install a garburator.
2. Ensure proper installation and functioning: Professional installation ensures that the garburator is installed correctly and operates efficiently.
3. Warranties and guarantees: Many professional garburator repair services offer warranties and guarantees on their work.
4. Avoid further damage to the garburator: Incorrect repairs or installations can cause further damage to the garburator, resulting in costly repairs down the line.

Steps to install a garburator:
1. Gather necessary tools and materials: Before installing a new garburator, make sure you have all the tools and materials required for the job.
2. Disconnect the old garburator (if applicable): If replacing an existing garburator, disconnect the old unit and remove it from the sink.
3. Install the new garburator: Follow the manufacturer's instructions to install the new garburator securely.
4. Connect the plumbing: Connect the garburator to the plumbing system using the appropriate fittings.
5. Test the garburator: Turn on the garburator and test it to ensure it is working correctly.

Maintenance tips to prolong the lifespan of a garburator:
1. Avoid putting certain items down the garburator: Avoid putting items like bones, fruit pits, grease, and fibrous materials down the garburator to prevent clogs.
2. Regular cleaning and maintenance: Clean the garburator regularly with a mixture of ice cubes and vinegar to remove buildup and odors.
3. Run cold water while using the garburator: Running cold water while using the garburator helps flush food waste down the drain and prevents clogs.
4. Schedule routine inspections and maintenance checks: Schedule regular inspections and maintenance checks with a professional to ensure your garburator is in good working condition.

1. How often should I clean my garburator?
It is recommended to clean your garburator once a week to prevent odors and buildup.
2. Can I repair my garburator on my own?
While some minor repairs can be done at home, it is best to hire a professional for more complex issues to avoid further damage.
3. How long does a garburator last?
On average, a garburator can last between 8-15 years with proper maintenance and care.
4. Can I install a garburator on my own?
If you have experience with plumbing and electrical work, you may be able to install a garburator on your own. However, it is recommended to hire a professional for proper installation.
5. What items should not be put down the garburator?
Avoid putting items like bones, fruit pits, grease, pasta, rice, and fibrous materials down the garburator to prevent clogs and damage.

In conclusion, garburator repair and installation are essential for maintaining a healthy and efficient kitchen in Calgary, Alberta. By following the steps outlined in this article and seeking professional help when needed especially from the the trusted company My Calgary Plumber, you can ensure that your garburator remains in good working condition. Remember to practice proper maintenance techniques and avoid putting harmful items down the garburator to prolong its lifespan. A well-maintained garburator will help keep your kitchen clean and functional for years to come, which will save you any stress of calling a plumber.



Powered by MCP


Share this Project
Share on LinkedIn
Contact Us
About Us

My Calgary Plumber

10325 Bonaventure Dr SE Suite 403, Calgary, AB T2J 7E4

(587) 707-0606


My Calgary Plumber is a local family-owned plumbing company offering 24-hour emergency residential plumbing, drain cleaning and water heater services.


We're Open! Call Now